Default Gateway Address Registration (Option 17)
When the DHCP is not supported, the Default Gateway Address is also
required in order to operate the telephone. To register theDefault Gateway
2
Address, follow the steps below:
1. Press OPTIONS, numeric key "1", "7", then ENTER.
2. Press ENTER.
3. Enter 4 digits of numeric password (see User Password Registration in
chapter 4). Then ENTER.
* Factory Default User Password - 9999
4. If the Gateway Address is already registered, the last saved address is
displayed. In order to input a new Gateway Address, simply enter it.
Press "#" key when the input of a dot (.) is required.
Note:
If you don't want to change the Gateway Address, just press ENTER.
5. After inputting a new Gateway Address, press ENTER.
Press either asterisk (*) to go back to sub-menu or OPTIONS to exit the
option menu.
2-6
GW ADR REGISTRATION
GW=10.36.213.210
ENTER USER PASSWORD
ENTER USER PASSWORD
****
ENTER GW ADDRESS
GW=10.36.213.210
COMPLETED