Rtp Port Registration (Option 24) - Fujitsu SRS-12I Administrator's Manual

RTP Port Registration (Option 24)

Real Time Transport Protocol (RTP) is a thin protocol providing support for
content identification, timing reconstruction, loss detection and security. To
change the value for the RTP port, follow the steps below:
1. Press OPTIONS, numeric key "2", "4", then ENTER.
RTP PORT REGISTRATION
PORT=16384
2. Press ENTER.
ENTER ADM PASSWORD
3. Enter 8 digits of numeric password (see Administrator Password
Registration in chapter 4). Then, ENTER.
ENTER ADM PASSWORD
********
*Factory default Administrator Password – 99999999
4. The default RTP Port has been set upon shipment from the manufacturer.
To overwrite, simply enter the new RTP Port address. The set will accept
an even number between 1024 - 65532. Factory Default - 16384.
RTP PORT REGISTRATION
PORT = 16384
5. Press ENTER.
PORT=16400
COMPLETED
Press either asterisk (*) to go back to sub-menu or OPTIONS to exit the option
menu.
(1024-65532
3
3-25