Jitter Buffer Size (Option 26) - Fujitsu SRS-12I Administrator's Manual

Jitter Buffer Size (Option 26)

This feature allows the user to setup how many packets of voice data are
buffered. The default setting has been set upon shipment from the
manufacturer. Refer to Appendix D, Jitter Buffer for more information about
this setting. To make changes, follow the steps below:
1. Press OPTIONS, numeric key, "2", "6", then ENTER.
JITTER BUFFER
G.711=0
2. Press ENTER.
ENTER ADM PASSWORD
3. Enter 8 digits of numeric administrator password (see Administrator
Password Registration in chapter 4). Then ENTER.
ENTER ADM PASSWORD
********
*Factory default Administrator Password – 99999999
4. The default Jitter Buffer has been already set upon shipment.
G.711 JITTER BUFFER
JITTER=0
Enter buffer number in the range of 0 ~ 7 for G.711 buffer.
G.711 JITTER BUFFER
JITTER=3
5. Press ENTER.
G.729 JITTER BUFFER
JITTER=2
Enter buffer number the range of 0 ~ 2.
G.729 JITTER BUFFER
JITTER=1
6. Press ENTER.
G.711=3
COMPLETED
Press either asterisk (*) to go back to sub-menu or OPTIONS to exit the option
menu.
G.729=2
(SELECT 0-7)
(SELECT 0-7)
(SELECT 0-2)
(SELECT 0-2)
G.729=1
3
3-21