Table of Contents
Advertisement
9. Assign the designated call appearances
In Selection 5 and Selection 6 above, CONF and TRAN were assigned.
The telephone automatically selects the call button to be used for the
additional connection for a conference or transfer. This button is called
the Designated Call Appearance (DCA).
If a DCA is not assigned, the telephone will automatically select a default
call button.
1. To manually assign the Designated Call Appearance key for your
telephone, press 9, then press ENTER.
3
2. Press the selected Multi-assign key.
3. Press ENTER. The following display is shown. The option to turn the
selected key ON or OFF is available.
4. Press 1 or 2 to change the current status and press ENTER or just
press ENTER to accept the current status.
Note:
If an invalid key is selected for the Designated Call Appearance, the
following display is shown:
3-16
DESIGNATED CA MODE
SELECT ASSIGN KEY
DESIGNATED CA MODE
DSGN CA=ON
1:ON
2:OFF
(SELECT 1-2)
DSGN CA=ON
COMPLETED
DESIGNATED CA MODE
INVALID SELECTION
(1)
(1)
(XX)
Advertisement
Table of Contents
