Table of Contents
Advertisement
1. Assign buttons to Call Appearances In CACH
1. Press 1, then ENTER.
CALL APPEARANCE MODE
CA=
The multi function button LED shows the status assigned to it (usually by
the C.O. download process).
• Green indicates a button already assigned as a Call Appearance (CA.)
• Red indicates a button already assigned as a Directory Number (DN),
as a network feature, or as a set feature such as One-Touch or MIC-
OFF.
• Unlit indicates an unassigned button.
2. Press the button you want to assign as a Call Appearance.
Press any unlit or green-lit multifunction button. (If a red button is pressed,
the display shows the message INVALID SELECTION, and the set waits for
a valid button to be pressed.)
• If a green button is pressed, the display shows the current "Call
Appearance" number assigned to that multifunction button. Enter a
new number to replace the current number or clear the current
number.
CA=
XX is the number of the multifunction button that was pressed. If a green-
lit button was pressed, the current number appears after CA=.
3. Two choices are available:
To add or change the CA number, enter the new number and press ENTER.
Or to clear the CA number, press CLEAR and then ENTER.
CA=XX
COMPLETED
If the CA number is cleared, no numbers appear after CA= and the button
indicator goes dark.
4. With your Call Appearance assignment complete, you have these
choices:
• To assign another Call Appearance, press the desired button and
repeat steps 2 and 3.
• To return to normal operation, press OPTIONS.
• To make additional button assignments, press asterisk (*). This returns
you to the menu mode main menu.
(XX)
(XX)
(XX)
3
3-9
Advertisement
Table of Contents
