Linkcom Slim IP Cam V2 User Manual page 28

Ringing cycles count: this option enable call repeating (or progressive call). In phone book is for
example filled first and second phone number and not create group. When come condition for first
number...
- ringing time is out
- phone number is busy
- Subscriber is not reachable / registrated in network (then second number is dialed. When the
same conditions come true and ringing cycles are setup 2 the whole cycle is repeated one
more time).
Same key pressed again: when you press again the same button then you setup door entry behavior:
- Cancel Call
- Redial
- Ignore
DTMF dialing timeout: this time concerns incoming calls from telephones and it decides for correct
code insertion. The principle is the same as previous parameter but it concerns codes from
telephone.
Camera light: wide-angle camera has possibility of extra lighting when light conditions are not
acceptable. The lighting profiles s by white LEDs (unfortunately infra LED can't be used but advantage
picture is fully in color). The door entry has dark sensor and you have following options of lighting:
- OFF: LEDs will never light
- during conversation: LEDs are always lighting during call independently on surrounding light
conditions
- in the night: LEDs are lighting according surrounding light conditions independently on call
- during night call: Led lights only during a call and the ambient lighting
Light intensity: here you setup LEDs light intensity
Labels light: name card might be backlighted by 3 ways:
- Never: name cards will never be back lighted
- at night: backlighting depends on surrounding light
- Always: Name card is permanently back lighted
Light intensity: here you setup backlight intensity
28/80
28/40