Linkcom Slim IP Cam V2 User Manual page 20

Delay time: is time, between closing code evaluation and relay closing. It has no influence for open
code which is performed immediately. Closing time is calculated from real relay closing.
Source relay 1 – 4 : relay closing starts closing of the same or other relay.
Synchronization delay: time between synchronization start and its evaluation. Usage for example in
more relays closing combination for one code.
Activation on call:
None (calling has no influence for relay status)
-
- Incoming call: relay closed during incoming call. The monostable for preprogrammed time.
The bistable permanently for all call duration.
Outgoing call: relay closed during outgoing call. The monostable for preprogrammed time.
-
The bistable permanently for all call duration.
Incoming as same as outgoing call : relay closed during every call. The monostable for
-
preprogrammed time. The bistable permanently for all call duration.
20/80
20/40