Wi-Fi Configuration - iOptron AllView Pro Instruction Manual

7. Wi-Fi Configuration

The iPano Wi-Fi is shipped with no password protection. You can change the SSID and enable
password protection so only you can make the connection.
To change the Wi-Fi settings:

Connect the computer/tablet/SmartPhone to iPano Wi-Fi;

Open the internet browser and type in

A login window will open. Enter "admin" as both User Name and Password;

Go to AP Settings;

Now you can change the SSID name from iPano_XXXXXX to Your Name, enable WPA2
encryption, etc.;

You may also go to account to change login name and password;

Restart the mount.
Note:
1. Please keep the Wi-Fi at AP (access point) mode
2. If ever you forgot your password, use "Factory Wi-Fi" to reset the WI-FI to factory default
settings.
Matrix Panorama
Circular Panorama
Time-lapse Photography
Custom Settings Bank
Global Settings
System
http://10.10.100.254
Language
Firmware Information
Factory Reset
Wi-Fi Switch
Wi-Fi Options
Set Beep
35
;
Information
Reset Wi-Fi
Factory Wi-Fi