Table of Contents
Advertisement
Figure 11 Adjust camera No-Parallax Point
There are two positions for Camera Mounting Platform #3: 65mm and 80mm, as shown in Figure 12. If
the distance from the base of the camera to the center of the lens is smaller than 65mm (see Figure
13), use the default setting on the Height Scale #6 (the inner scales). Otherwise, if the distance is
greater than 65mm, you need to lower the Camera Mounting Platform #3 to the 80mm position on the
Height Scale #6 and use the outer scales.
Figure 12 Maximum camera mount height 65mm and 80mm
Adjust Camera Height Position
Find the height number of the camera, the distance from the base of the camera to the center of the
lens. For example, the height number of a Canon EOS 5D Mark II is 43.5mm. Release Height Locks #1
on both Primary Arm #2 and Auxiliary Arm #8. Adjust the camera by moving the Camera Mounting
Platform #3 up and down so that the Height Scale #6 is set at the 43.5mm by reading the inner scale.
12
Advertisement
Table of Contents
