Rotate Tall; Multi Picture; Interval Timer - iOptron AllView Pro Instruction Manual

Aspect Ratio
Picture Overlap

Rotate Tall

Multi Picture

Interval Timer

Brackets
Rotate Tall
4.5.3.
Choose take the photo in landscape (normal) or portrait orientation. The default setting is Disable
(landscape). If you enable this function, make sure that the camera is mounted in vertical with the
vertical mounting dovetail plate.
Picture Overlap
Rotate Tall
Multi Picture
Interval Timer
Brackets
Bracket Delay
Multi Picture
4.5.4.
This function will let you set the number of photographs that will be triggered per position, up to 20. The
default is 1.
Rotate Tall
Multi Picture
Interval Timer
Brackets
Bracket Delay
Start Del/trig
Interval Timer
4.5.5.
This will set the mount to take a series of panoramas over a period of time. If Disable is selected, the
mount will stop at the end of a session. If Ext. Trigger is selected, the mount will wait for the remote
signal to start the panorama again. If Timer is selected, you can enter how long the mount will wait until
next session is started, until you stop the mount.
Multi Picture
Interval Timer
Brackets
Bracket Delay
Start Del/trig
Check List
Save the changes?
[X]=Back [OK]=Yes
This function will take panorama time-lapse photos.
Picture Overlap 30%
25%
30%
35%
40%
Rotate Tall Disable
Disable OK
Enable
Multi Picture 1
1
2
3
4
Interval Timer Disable
Disable OK
Ext. trigger
Timer
00D
00:00:00
25
OK
OK
Interval Timer Disable
Disable
Ext. trigger
Timer OK