iOptron AllView Pro Instruction Manual page 14


Find two vertical objects; one near, one far. Position your equipment so that these objects line
up in the viewfinder;

Level the iPano and camera;

Set the focal length of your camera;

Start out by positioning the approximate center of your lens over the axis of rotation;

Now pan the mount left;

If the rear object appears to shift to the left, then you are ahead of the No-Parallax Point. Slide
the Dovetail Mounting Module #4 forward and try again;

If the rear object appears to shift to the right, you are behind the No-Parallax Point. Slide the
Dovetail Mounting Module #4 back and try again;

When the optical center of the lens is directly over the axis of rotation, the rear object will not
appear to move relative to the front object;

Continue until objects stay aligned when you pan left and right;

Record your results so that your setup can be re-created.
14