Table of Contents
Advertisement
Pretrigger Delay
4.4.10.
This delay is between the end of the mount movement and beginning of the trigger signal to your
camera. It will allow the camera to settle after mount movement. The delay time can be set at 0.0s, 0.1s,
0.2s, 0.3s, 0.4s, 0.5s, 0.6s, 0.7s, 0.8s, 0.9s, 1.0s, 1.5s, 2.0s, 2.5s or 3 seconds. The default is 0.1s.
Shutter Retries
Pretrigger Delay
Camera Setup
Bank D
Autofocus
Time/Focus
Camera Setup
4.4.11.
This will work through you to set the camera FOV. If you have a zoom lens, you need to set the zoom
first. Follow the instruction on the screen to set up the camera FOV. Use ▼ key to tilt the camera
downward until the top of view finder/display screen aligned with horizon, then press OK. Use ▲ key to
tilt the camera upward until the bottom of view finder/display screen aligned with horizon, then press
OK.
Pretrigger Delay
Camera Setup
Bank D
Autofocus
Time/Focus
Mirror Lock-up
Align horizon with top of
camera screen
[X]=Cancel
[OK]=Next
4.5. Global Settings
Aspect Ratio
4.5.1.
Set the ratio of the width to height of the camera system. The default setting is 3:2. You may set the
aspect ratio to 1:1, 3:2, 4:3 and 16:9, as well as customer values from 0.50:1 to 2:00:1.
Matrix Panorama
Circular Panorama
Time-lapse Photography
Custom Settings Bank
Global Settings
System
Picture Overlap
4.5.2.
Set the overlap between each photos for panorama stitch. The overlap can be selected from 25% to
75%, with 5% increments. The default setting is 30%.
Pretrigger Delay 0.1s
0.0s
0.1s
OK
0.2s
0.3s
Current FOV
0.0 vert degrees
[X]=Cancel
[OK]=Set
Align horizon with top of
camera screen
[X]=Cancel
[OK]=Next
Aspect Ratio
Picture Overlap
Rotate Tall
Multi Picture
Interval Timer
Brackets
24
Set camera's Zoom
[X]=Cancel
[OK]=Done
Current FOV
20.0 vert degrees
[X]=Cancel
[OK]=Set
Aspect Ratio 3:2
1:1
3:2
4:3
16:9
OK
Advertisement
Table of Contents
