Subscribe to Our Youtube Channel
Related Manuals for Chiayo QR-4000 U
Summary of Contents for Chiayo QR-4000 U
- Page 1 QR-4000U (U1~U4) / QR-4000U (S1~S4) QR-4000V (V1~V4) / QR-4000V (S1~S4) UH-1000 / VH-1000 / UB-1000 / VB-1000 SQ-916 / SQ-316 / SM-916 / SM-316 SQ-816 / SQ-216 / SM-816PLUS / SM-216 Operating Manual Printed in Taiwan, Jan 2003 12I357...
- Page 2 When batteries are weak, replace the batteries altogether at the same time. Do not mix and use new and old batteries together. Models QR-4000 U QR-4000 V Position the receiver such that it has the least possible obstructions between it Frequency Band and the transmitter.
- Page 3 REMARKS QR-4000U RECEIVER RF Interference If you encounter receiving interference (from other than an operating TV station), often it can be overcome by adjusting the receiver's squelch control, as described on below. Please note that wireless frequencies are shared with other radio services. According to FCC requlations, wireless microphone operations are unprotected Fig.1 from interference from other licensed operations in the band.
-
Page 4: Receiver Installation
The transmitter should also be at least 1m away from a wall or metal surface to minimize reflections. The CHIAYO transmitter should also be at least 1m away from the UDR-1000M receiver as shown. -
Page 5: Battery Empty
Making changes to the various displays. Battery Symbols and Status Press until this page appears. Battery Full Battery 30% CHIAYO UDR-1000M Remark : Brand name and Model number are factory preset. It is NOT user- changeable. -------------------------------------------------------------------------------------------------------- Battery 60% Battery empty... - Page 6 USER / PRESET DISPLAY To change Squelch level Press button to go to U-MODE Press until the display. P-MODE this page appears. -100dBm Press SET for about 3 seconds to enter the SET mode. Press the button to Press SET button for 2 seconds to enter the SET mode and the cursor will flash on select the USER or the PRESET model.
- Page 7 AKLn : AKLn : AKLn : Operating Instructions PWR/Min Making changes to the various displays Name Display Press button to go to SDR-916M(for USA market) SDR-916M(for market outside USA) CHIAYO CHIAYO CHIAYO CHIAYO CHIAYO CHIAYO CHIAYO CHIAYO CHIAYO CHIAYO CHIAYO...
- Page 8 Viewing of the various pages in the LCD display There are three control buttons under First press power ON switch for about 2 seconds and release the button,the the battery compartment cover, just following page will appear: on top of the battery: CHIAYO CHIAYO CHIAYO BATTERIES UH-1000 UH-1000 UH-1000 UH-1000 microphone requires 2 pieces of "...
- Page 9 INSTALLATION OF CABLE RESTRAINT HAND-HELD MICROPHONE(SQ-216/SQ-316/ SQ-816/SQ-916) To prevent contact noise caused by constant tension applied to the connector,, 1 The microphone is shown in Fig 1. a cable restraint is designed such that tension is totally reduced when it is properly used ( see Fig.6 ).
- Page 10 INSTALLATION OF BATTERIES(SM-216/SM-816Plus) BATTERIES This transmitter uses 3 pieces of " AA " size batteries (Alkaline battery is recommended ). To install or remove the SQ-216 / SQ-816 This microphone requires 3 pieces of " AA " size battery to operate. Please insert the batteries batteries, press the release buttons at the edges of the transmitter to open or close the cover as illustrated ( Fig.2 ).
-
Page 11: Installation Of Batteries
BELT-PACK TRANSMITTER (UB-1000 / VH-1000) BELT-PACK TRANSMITTER(SM-216/SM-316/SM-816PLUS/SM-916) Antenna Battery weak / audio mute indicator Audio mute switch Mini-XLR connector Power ON / OFF switch LCD display Mini USB port Cover release button Charging contacts Lavalier microphone Mic clip DOWN INSTALLATION OF BATTERIES UB-1000 uses 2 pieces of "...
Need help?
Do you have a question about the QR-4000 U and is the answer not in the manual?
Questions and answers