Image Settings - Bosch DINION inteox 7100i IR User Manual

DINION inteox 7100i IR | FLEXIDOME inteox 7100i
Azimuth [°]
The orientation of the camera in a counter-clockwise angle starting with 0° in the east (WGS
84) or on the X-axis (Cartesian). If the camera is directed towards the north (WGS 84) or the
Y-axis (Cartesian), the azimuth is 90°.
Click Set to apply the changes.
4.5.4

Image settings

Exposure
Mode
Select the appropriate mode from the drop down list.
Select Auto to let the camera optimize the exposure. The exposure settings of the camera can
be fixed in Manual mode
Shutter time [μs]
The sensor integration time can be set in manual exposure mode.
Gain
The gain can be set in manual exposure mode.
Iris [dB]
The lens aperture can be set in manual mode.
Adjust the sliders to the appropriate level.
Day/night
Select the appropriate mode from the drop-down list.
–
–
–
Zoom/Focus
Zoom position
Adjust the field of view by changing the focal length of the lens.
Focus position
Adjust the sliders to the appropriate level.
Adjust the optimal focus position manually (adjust the zoom position before fine tuning the
focus position).
Autofocus
Click Autofocus to have the device automatically adjust for the optimal focus position.
White balance
Select the appropriate white balance mode from the drop-down list.
Select Auto to let the camera optimize the white balance. In Manual RGB mode the Red,
Green, and Blue gain can be manually set to a desired position by adjusting the R-gain and B-
gain.
R-gain
In Manual white balance mode, adjust the red gain slider to offset the factory white point
alignment (reducing red introduces more cyan).
B-gain
In Manual white balance mode, adjust the blue gain slider to offset the factory white point
alignment (reducing blue introduces more yellow).
Bosch Security Systems B.V.
Auto - the device switches the IR cut-off filter on and off depending on the scene
illumination level.
Color - the device always produces a color signal regardless of light levels.
Monochrome - the IR cut-off filter is removed, giving full IR sensitivity.
User manual
Configuration | en 25
2021-08 | V01 | DOC