Introduction; Quick Start Guide; Getting Started - Ambient Weather WS-0900-IP User Manual

1. Introduction

Thank you for your purchase of the Ambient Weather WS-0900-IP Wireless Internet Remote
Monitoring Weather Station. The following user guide provides step by step instructions for
installation, operation and troubleshooting. To download the latest manual, firmware upgrades and IP
Finder Tools, visit:

2. Quick Start Guide

Although the manual is comprehensive, much of the information contained may be intuitive. In
addition, the manual does not flow properly because the sections are organized by components.
The following Quick Start Guide provides only the necessary steps to install, operate the weather
station, and upload to the internet, along with references to the pertinent sections.
Step
1 Assemble and power up the sensor array
2 Power up the outdoor thermo-hygrometer sensor
3 Power up the indoor thermometer-hygrometer-barometer sensor
4 Power up the ObserverIP, connect to your router and synchronize with the
indoor and outdoor sensors
5 Calibrate the relative pressure to sea-level conditions (local airport) on the
ObserverIP module
6 Register and upload to Weather Underground Weather Server

3. Getting Started

The WS-0900-IP weather station consists of an ObserverIP receiver, the sensor array, the outdoor
thermo-hygrometer sensor, and the indoor wireless thermo-hygrometer-barometer.
Version 1.1 ©Copyright 2016, Ambient LLC. All Rights Reserved.
http://www.ambientweather.com/observerip.html
Required
Description Section
3.3
3.4
3.6
3.8
3.11.6.1
3.10
Page 2