Table of Contents
Advertisement
Vision™ OPLC™
i4 Automation Ltd - 01480 395256
The Unitronics V350-35-RA22 offers the following onboard I/Os:
12 Digital Inputs, configurable via wiring to include 2 Analog, 2 PT100/TC, and
1 HSC/Shaft-encoder Input
8 Relay Outputs, 2 Analog Outputs
General Description
V350 OPLCs are micro-OPLCs, rugged programmable logic controllers that comprise:
On-board I/O configuration
Built-in operating panel containing a 3.5" Color Touchscreen and programmable function keys
Communications
I/O Options
Information Mode
Programming
Software,
& Utilities
Unitronics
1 built-in serial port: RS232/RS485
Optional: the user may order and install
one or both of the following modules:
- RS232/RS485/Ethernet
- CANbus
Communication Function Blocks
include: SMS, GPRS, MODBUS serial/IP.
Protocol FB enables PLC to
communicate with almost any external
device, via serial or Ethernet
communications
V350 supports digital, high-speed, analog,
weight and temperature measurement I/Os via:
On-board I/O configuration
Model-dependent
I/O Expansion Modules
Local or remote I/Os may be added via
expansion port or CANbus.
This mode enables you to:
View & Edit operand values, COM port settings, RTC and screen
contrast/brightness settings
Calibrate the touchscreen
Stop, initialize, and reset the PLC
To enter Information Mode, press the <i> button for several seconds.
The Unitronics Setup CD contains VisiLogic software and other utilities
VisiLogic
Easily configure hardware and write both HMI and Ladder control
applications; the Function Block library simplifies complex tasks
such as PID. Write your application, and then download it to the
controller via the programming cable included in the kit.
Utilities
Includes UniOPC server, Remote Access for remote programming
and diagnostics, and DataXport for run-time data logging.
To learn how to use and program the controller, as well as use utilities such as
Remote Access, refer to the VisiLogic Help system.
V350-35-RA22
Installation Guide
1
Advertisement
Table of Contents
Related Manuals for Unitronics V350-35-RA22
Summary of Contents for Unitronics V350-35-RA22
-
Page 1: Installation Guide
Calibrate the touchscreen Stop, initialize, and reset the PLC To enter Information Mode, press the <i> button for several seconds. Programming The Unitronics Setup CD contains VisiLogic software and other utilities Software, VisiLogic & Utilities Easily configure hardware and write both HMI and Ladder control applications;... -
Page 2: Standard Kit Contents
All examples and diagrams are intended to aid understanding, and do not guarantee operation. Unitronics accepts no responsibility for actual use of this product based on these examples. Please dispose of this product according to local and national standards and regulations. -
Page 3: Mounting Dimensions
4. Tighten the bracket screws against the panel. Hold the bracket securely against the unit while tightening the screw. 5. When properly mounted, the controller is squarely situated in the panel cut-out as shown in the figure to the right. Unitronics... -
Page 4: Din Rail Mounting
V350-35-RA22 Installation Guide DIN-rail Mounting i4 Automation Ltd - 01480 395256 1. Snap the controller onto the DIN rail as shown in the figure to the right. 2. When properly mounted, the controller is squarely situated on the DIN-rail as shown in the figure to the right. -
Page 5: Input And Output Jumper Settings
Analog Output 0: Set to Voltage/Current Digital* Set to JP13 Voltage Voltage* Current Current Input 6: Set Type - Digital or Analog #2 Set to Analog Output 1: Set to Voltage/Current Digital* Set to JP14 Voltage Voltage* Current Current *Default settings Unitronics... - Page 6 V350-35-RA22 Installation Guide I/O Wiring i4 Automation Ltd - 01480 395256 I/O Configuration npn Input Wiring Input wiring npn (sink) HSC input wiring, npn (sink) pnp Input Wiring Input wiring pnp (source) HSC input wiring, pnp (source) Shaft-encoder Unitronics...
- Page 7 -Blue PT100 (Sensor 0): use Input 9 and 10, related to CM signal. PT100 (Sensor 1): use Input 7 and 8, related to CM signal. 4 wire PT100 can be used by leaving one of the sensor leads unconnected. Unitronics...
-
Page 8: Increasing Contact Life Span
V350-35-RA22 Installation Guide Analog Outputs Relay Outputs i4 Automation Ltd - 01480 395256 The 0V signal of the analog input and output must be connected to the controller’s 0V. Increasing Contact Life Span To increase the life span of the... -
Page 9: Communication Port
To change the communication setting to RS485, both communication standard jumpers must be moved To change the RS485 termination, both termination jumpers must be moved To access the jumpers, you must open the controller according to the instructions beginning on page 10. Unitronics... - Page 10 Note that you must replace the back cover securely before powering up the controller. The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market.