Page 1
UCR-ST-B8 Router The Unitronics UCR-B8 enable Unitronics PLC products to communicate via mobile networks (4G). Highlights: 3 Ethernet LAN ports and 1 WAN (configurable can act as LAN) Embedded GPS receiver. Wireless LAN access point or client to existing network.
UCR-ST-B8 Front View # Description LAN Ethernet ports WAN Ethernet port LAN LEDs WAN LED RS485 connector Power connector RS232 connector Input / Output connector Power LED Mobile connection status LED Mobile signal strength indication LEDs Back View # Description...
Page 3
UCR-ST-B8 Ethernet Port LEDs ACTION DESCRIPTION LED turned ON Operating as a 10/100 Mbps connection LED turned OFF No link established LED blinking Connection established and there is activity on this port (data being transferred) LEDs light up and turn OFF in...
UCR-ST-B8 Powering Options Power Connector 4 pin power connector: Description Direction Power Ground Black Digital Input Green Digital Output White Passive Power Over Ethernet The device may also be powered by an Ethernet cable via the LAN1 port: (Do not use in other ports!)
Page 6
UCR-ST-B8 Power Connector Associated Description Pins Digital Input 1, 0-40VDC (Low 0-5V, High 8-40V) Digital Output 1, 0-30VDC, 300mA (sink) Mounting Use the Din Rail bracket or M3 screws to mount the device. Spectra GmbH & Co. KG Spectra (Schweiz) AG vertrieb@spectra.de...
The information provided is subject to change without notice. The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market.