Unitronics V130-33-TR20 Installation Manual

Vision™ OPLC™
i4 Automation Ltd - 01480 395256
The Unitronics V130-33-TR20 offers the following onboard I/Os:
 12 Digital Inputs, configurable via wiring to include 2 Analog, and 3 HSC/Shaft-encoder Inputs

6 Relay Outputs

2 high-speed npn Transistor Outputs

General Description

V130 OPLCs are micro-OPLCs, rugged programmable logic controllers that comprise:
 On-board I/O configuration
 Built-in operating panel containing a 2.4" screen and a keypad
Communications
I/O Options
Information Mode
Programming
Software,
& Utilities
Unitronics
 1 built-in serial port: RS232/RS485
 Optional: the user may order and
install one or both of the following
modules:
- RS232/RS485/Ethernet
- CANbus
 Communication Function Blocks
include: SMS, GPRS, MODBUS
serial/IP. Protocol FB enables PLC to
communicate with almost any external
device, via serial or Ethernet
communications
V130 supports digital, high-speed, analog,
weight and temperature measurement I/Os via:
 On-board I/O configuration
Model-dependent

I/O Expansion Modules
Local or remote I/Os may be added via
expansion port or CANbus.
This mode enables you to:
 View & Edit operand values, COM port settings, RTC and screen
contrast/brightness settings
 Stop, initialize, and reset the PLC
To enter Information Mode, press the <i> button for several seconds.
The Unitronics Setup CD contains VisiLogic software and other utilities.
 VisiLogic
Easily configure hardware and write both HMI and Ladder control
applications; the Function Block library simplifies complex tasks such
as PID. Write your application, and then download it to the controller
via the programming cable included in the kit.

Utilities
Includes UniOPC server, Remote Access for remote programming
and diagnostics, and DataXport for run-time data logging.
To learn how to use and program the controller, as well as use utilities such
as Remote Access, refer to the VisiLogic Help system.
V130-33-TR20
Installation Guide
1