Protocols And Standards; Configuring Ipv6 Pim-Dm; Ipv6 Pim-Dm Configuration Task List - HP 5920 series Configuration Manual

Figure 52 IPv6 multicast address format
An IPv6 admin-scoped zone with a larger scope field value contains an IPv6 admin-scoped zone
with a smaller scope field value. The zone with the scope field value of E is the IPv6 global-scoped
zone. Table 6
Table 6 Values of the Scope field
Value
0, F
1
2
3
4
5
6, 7, 9 through D
8
E

Protocols and standards

RFC 3973, Protocol Independent Multicast-Dense Mode (PIM-DM): Protocol Specification(Revised)
•
RFC 4601, Protocol Independent Multicast-Sparse Mode (PIM-SM): Protocol Specification (Revised)
•
• RFC 3956, Embedding the Rendezvous Point (RP) Address in an IPv6 Multicast Address
RFC 5059, Bootstrap Router (BSR) Mechanism for Protocol Independent Multicast (PIM)
•

Configuring IPv6 PIM-DM

This section describes how to configure IPv6 PIM-DM.

IPv6 PIM-DM configuration task list

Task at a glance
(Required.)
(Optional.)
(Optional.)
lists the possible values of the scope field.
Enabling IPv6 PIM-SM
Enabling the state refresh feature
Configuring state refresh parameters
Meaning
Reserved
Interface-local scope
Link-local scope
Subnet-local scope
Admin-local scope
Site-local scope
Unassigned
Organization-local scope
Global scope
145
Remarks
N/A
N/A
N/A
IPv6 admin-scoped zone.
IPv6 admin-scoped zone.
IPv6 admin-scoped zone.
IPv6 admin-scoped zone.
IPv6 admin-scoped zone.
IPv6 global-scoped zone.