B&B Electronics iMcV-LIM 10/100 Operation Manual

B&B Electronics iMcV-LIM 10/100 Operation Manual

Advertisement

Quick Links

FCC Radio Frequency Interference Statement

iMcV-LIM 10/100
This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which the user will be required to correct the interference at his own expense.
Operation Manual
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does not exceed the Class B
limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of
Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de classe B
prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada.

Limited Lifetime Warranty

Effective for products of B&B Electronics shipped on or after May 1, 2013, B&B Electronics warrants that each such
product shall be free from defects in material and workmanship for its lifetime. This limited lifetime warranty is applicable
solely to the original user and is not transferable.
This warranty is expressly conditioned upon proper storage, installation, connection, operation and maintenance of
products in accordance with their written specifications.
Pursuant to the warranty, within the warranty period, B&B Electronics, at its option will:
1. Replace the product with a functional equivalent;
2. Repair the product; or
3. Provide a partial refund of purchase price based on a depreciated value.
Products of other manufacturers sold by B&B Electronics are not subject to any warranty or indemnity offered by B&B
Electronics, but may be subject to the warranties of the other manufacturers.
Notwithstanding the foregoing, under no circumstances shall B&B Electronics have any warranty obligations or any other
liability for: (i) any defects resulting from wear and tear, accident, improper use by the buyer or use by any third party
except in accordance with the written instructions or advice of the B&B Electronics or the manufacturer of the products,
including without limitation surge and overvoltage conditions that exceed specified ratings, (ii) any products which have
been adjusted, modified or repaired by any party other than B&B Electronics or (iii) any descriptions, illustrations, figures
as to performance, drawings and particulars of weights and dimensions contained in the B&B Electronics' catalogs, price
lists, marketing materials or elsewhere since they are merely intended to represent a general idea of the products and do
not form part of this price quote and do not constitute a warranty of any kind, whether express or implied, as to any of the
B&B Electronics' products.
THE REPAIR OR REPLACEMENT OF THE DEFECTIVE ITEMS IN ACCORDANCE WITH THE EXPRESS WARRANTY SET
FORTH ABOVE IS B&B ELECTRONIC' SOLE OBLIGATION UNDER THIS WARRANTY. THE WARRANTY CONTAINED
IN THIS SECTION SHALL EXTEND TO THE ORIGINAL USER ONLY, IS IN LIEU OF ANY AND ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES AND INDEMNITIES ARE EXPRESSLY DISCLAIMED,
INCLUDING WITHOUT LIMITATION (I) THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
OF MERCHANTABILITY AND (II) ANY WARRANTY THAT THE PRODUCTS ARE DO NOT INFRINGE OR VIOLATE THE
INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY. IN NO EVENT SHALL B&B ELECTRONICS BE LIABLE FOR
LOSS OF BUSINESS, LOSS OF USE OR OF DATA INTERRUPTION OF BUSINESS, LOST PROFITS OR GOODWILL OR
OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES. B&B ELECTRONIC SHALL
DISREGARD AND NOT BE BOUND BY ANY REPRESENTATIONS, WARRANTIES OR INDEMNITIES MADE BY ANY
OTHER PERSON, INCLUDING WITHOUT LIMITATION EMPLOYEES, DISTRIBUTORS, RESELLERS OR DEALERS OF
B&B ELECTRONIC WHICH ARE INCONSISTENT WITH THE WARRANTY, SET FORTH ABOVE.
ii

Advertisement

Table of Contents
loading

Summary of Contents for B&B Electronics iMcV-LIM 10/100

  • Page 1: Fcc Radio Frequency Interference Statement

    FCC Radio Frequency Interference Statement iMcV-LIM 10/100 This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 2: Table Of Contents

    Certifications ....................12   difficulty in the installation: if a link partner that is connected to the iMcV-LIM 10/100 media converter is powered down on the copper port, noise on the copper segment may be detected and transferred to the fiber line. A result of the noise will generate errors that look like CRC errors.
  • Page 3: Installing An Imcv-Lim 10/100

    To manage one or more iMcV-LIM 10/100, an SNMP agent must be present in the For the iMcV-LIM 10/100 to function properly, the copper port must have link before chassis.
  • Page 4: Troubleshooting Features

    10/100 partner to blink. Troubleshooting Features When the iMcV-LIM 10/100 is in one of the FORCE modes, enable LFD by setting S1 to the ON position. The iMcV-LIM 10/100 media converters include two advanced troubleshooting In order for LFD to function properly, Force mode must be enabled by setting: features to help locate “silent failures”...
  • Page 5: Led Operation

    LED Operation Troubleshooting Features The iMcV-LIM 10/100 features several standard and diagnostic LEDs per port. The 10/100 Autosensing Modules includes two advanced troubleshooting features, Transparency and Link Fault Detection, to help locate “silent failures” on the network. Twisted Pair Port Transparency Glows green when a twisted pair link is established.
  • Page 6: Specifications

    Specifications B&B Electronics Technical Support Operating Temperature Tel: (800) 346-3119 (in the U.S. and Canada) +32°F to +122°F (0°C to +50°C) Monday-Friday, 7:00am-7”00pm CST Storage Temperature -4°F to 158°F (-20°C to +70°C) +353 91 792444 (Europe) Humidity Monday through Friday 8:00am - 5:00pm GMT 5 - 95% (non-condensing) Fax: (815) 433-5109 U.S.
  • Page 7: Fiber Optic Cleaning Guidelines

    Electrostatic Discharge Precautions Fiber Optic Cleaning Guidelines Electrostatic discharge (ESD) can cause damage to any product, add-in modules or Fiber Optic transmitters and receivers are extremely susceptible to contamination by stand alone units, containing electronic components. Always observe the following particles of dirt or dust, which can obstruct the optic path and cause performance precautions when installing or handling these kinds of products degradation.
  • Page 8: Certifications

    The information in this document is subject to change without notice. B&B Electronics assumes no responsibility for any errors that may appear in this document. iMcV-LIM 10/100 is a trademark of B&B Electronics. Other brands or product names may be trademarks and are the property of their respective companies.

Table of Contents