Download Print this page
B&B Electronics IE-MiniMc Operation Manual

B&B Electronics IE-MiniMc Operation Manual

Industrial ethernet miniature media converter

Advertisement

Quick Links

FCC Radio Frequency Interference Statement

IE-MiniMc
Class A (using DC terminal power or Power Over Ethernet (POE))
This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
Operation Manual
cause harmful interference in which the user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does not exceed the Class A
limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of
Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de classe A
prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada.
Class B (using any DC jack options)
This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which the user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does not exceed the Class B
limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of
Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de classe B
prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada.
i

Advertisement

loading

Summary of Contents for B&B Electronics IE-MiniMc

  • Page 1: Fcc Radio Frequency Interference Statement

    FCC Radio Frequency Interference Statement IE-MiniMc Class A (using DC terminal power or Power Over Ethernet (POE)) This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC Rules.
  • Page 2: Table Of Contents

    Pursuant to the warranty, within the warranty period, B&B Electronics, at its option will:   Powering the IE-MiniMc ..................2   1. Replace the product with a functional equivalent; About Power Over Ethernet (PoE) and IE-MiniMc ..........2   2. Repair the product; or LED Operation ....................2  ...
  • Page 3: About The Ie-Minimc

    A PowerTray/18 for high density applications cabling. Hardware Mounting Options LED Operation The IE-MiniMc can be mounted on a DIN rail or using wall mount brackets (shown below). Each IE-MiniMc includes two LEDs, located on the RJ-45 connector. LED functions are as follows: FX LNK/ACT Glows green when a link is established on the fiber port;...
  • Page 4: Dc Terminal Block Wiring Instructions

    0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm) When installing multiple IE-MiniMc units on a DIN rail, the end user can connect to one DC input source, and then cascade from one DC block to the next, until...
  • Page 5: Fiber Optic Cleaning Guidelines

    Fiber Optic Cleaning Guidelines Electrostatic Discharge Precautions Fiber Optic transmitters and receivers are extremely susceptible to contamination by Electrostatic discharge (ESD) can cause damage to any product, add-in modules or particles of dirt or dust, which can obstruct the optic path and cause performance stand alone units, containing electronic components.
  • Page 6: Safety Certifications

    The information in this document is subject to change without notice. B&B Electronics assumes no responsibility for any errors that may appear in this document. IE-MiniMc is a trademark of B&B Electronics. Other brands or product names may be trademarks and are the property of their respective companies.