Ipower Control Panel On Mower Handle - Qualcast CLMB3634M Instruction Manual

Operating Instructions & Tips
Mowing Advice (continued)
WARNING! A flashing LED on the cutting mode control panel indicates that the current is too high. A
flashing LED on the battery indicates that the voltage is too low. In either case the motor will be shut
down automatically . Do not continue to activate the On/Off switch if the motor has been shut down
automatically. The battery may be damaged.
WARNING! Switch the machine off, remove the isolator key and the battery before adjusting or
cleaning or if the cable is cut, damaged or entangled.

iPower Control Panel on Mower Handle

10
17
Panel rotation
Auto mode: automatically varies the amount of power delivered to the motor while you work as grass
conditions vary.
NOTE! The battery will run for longer on lower power settings than on higher power settings.
Checking the battery charge level: Press on the battery charge status button
theactual. battery charge level. The LEDs
panel below)
: the control panel on the handle can be rotated for better readability.
17
Customer Helpline 08456 400 800
will display the battery charge level. (See Battery LED
30
30
29
to check
29
15