Assemble The Lawn Mower
WARNING!
Always take care when removing the packaging, to prevent damage to you or to
the lawn mower.
This item requires a two-person lift to remove it from the packaging. Make sure
that you have sufficient space to put the lawn mower down. Keep your feet
apart so that you have a stable position; bend at the knees and keep your back
straight.
Always recycle the packaging in accordance with local recycling schemes.
Attaching the handle
1.
Rotate the quick clamp (A) 180°, fully open to disengage the quick clamp.
2.
Lift the handle to the required height. NOTE: There are 3 hoses in the frame support
(B). Choose the same position on both sides to fix the quick clamp.
3.
Rotate the quick clamp 180° to fully engage the quick clamp.
Note: If the fixation for the quick clamp is not tight enough, use a wrench to tighten the M8
nut (C).
A
B
C
11