Assembly; Step 1 - Handle Base Assembly - Qualcast CLMB3634M Instruction Manual

Assembly

Step 1 - Handle Base Assembly

2
Do not connect the battery and/or the isolator key before the product is completely
assembled.
Some models have the handles partially fitted inside the box. In this case unfold the handles and
tighten the 4 fasteners.
If handles are no pre-assembled, proceed as follows:
• Fit the handle base to the deck with the bolts, washers and fasteners
• Ensure that the cable clips supplied are used to fix the cable to the handle.
8
3
Customer Helpline 08456 400 800