Assembly
Handle Assembly
2
3
9
13
•
Place the ends of the lower handle
•
Secure lower handle
the deck and through the bottom end of the handle.
•
Repeat on the other side.
•
Ensure the upper handle
•
Fix the upper handle
levers
provided. There are two possible height positions. Choose the one most suitable to the
4
operator's height. The upper handle should be able to move when fitted correctly, this allows the
hover mower to float freely.
•
Clip the cable to the handle bar with the cable clamp
When the two quick release levers
Ensure the power cable is not caught between the folding sections.
10
5
4
3
4
5
into the solts
5
to the deck by firmly pushing a screw
3
and the lower handle
section to the lower handle
3
4
are loosened, the handle can be folded (Fig.4 ) for easy storage.
Customer Helpline 0845 077 8888
through the retaining holes on
12
5
are aligned correctly.
. Use the bolts
and quick release
5
13
provided.
9
12