Settings For The Dsl Connection; Settings For The Isdn Connection - Lancom DSL Series Manual

Table of Contents

Advertisement

The Wireless LAN can be „closed" to prevent this procedure. In this case, no
enrolment with the network name 'ANY' will be accepted.
For standard, LANCOM base stations are responsive under the net-
work name 'LANCOM'. The wireless basic configuration of a base sta-
tion takes therefore place via this network name. If another network
name is set during the basic configuration, also the Wireless LAN
access of the configuring mobile base station must be changed to this
new network name after closing the basic configuration.
Selection of a radio channel
The base station operates in a certain radio channel. The radio channel will be
selected from a list of up to 11 channels in the 2,4 GHz frequency range or
up to 19 channels in the 5 GHz frequency range. (in various countries some
radio channels are restricted, see appendix).
The used channel and frequency range define the operating of the common
radio standard, in doing so the 5 GHz frequency range correspond to the IEEE
802.11a standard and the 2,4 GHz frequency range to the IEEE 802.11g and
IEEE 802.11b standard.
If no further base stations operate in reach of the base station, any radio
channel can be adjusted. Otherwise, the channels in the 2,4 GHz band must
be chosen in the way that they preferably do not overlap one another or have
a distance as great as possible respectively. The automatic setting is normally
enough in the 5 GHz band, in which the LANCOM Wireless DSL base station
itself adjust the best channel via TPC and DSF.
3.1.4

Settings for the DSL connection

For the DSL connection it may be necessary to enter the transfer protocol
being used. The wizard will automatically enter the correct settings for major
DSL providers. You only need to enter the protocol used by your DSL provider
if the wizard does not list your provider.
3.1.5

Settings for the ISDN connection

Set up the basic configuration of your ISDN connection if required. You will
need the following data:
One or more ISDN MSNs on which the router will accept calls. MSNs are
ISDN subscriber numbers that are assigned to you by your telephone pro-
LANCOM Wireless DSL – LANCOM Wireless ADSL
Chapter 3: Basic configuration
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Adsl series

Table of Contents