Lancom DSL Series Manual page 24

LANCOM Wireless DSL – LANCOM Wireless ADSL
Chapter 2: Installation
Meanings of the LEDs
In the following sections we will use different terms to describe the behaviour
of the LEDs:
This LED indicates that the device is operational. After the device has been
Power
switched on, it will flash green for the duration of the self-test. After the self-
test, either an error is output by a flashing red light code or the device starts
and the LED remains lit green.
off
green
green
red/
green
red
24
Power
Online
Blinking means, that the LED is switched on or off at regular intervals in
the respective indicated colour.
Flashing means, that the LED lights up very briefly in the respective col-
our and stay then clearly longer (approximately 10x longer) switched off.
Inverse flashing means the opposite. The LED lights permanently in the
respective colour and is only briefly interrupted.
Flickering means, that the LED is switched on and off in irregular inter-
vals.
blinking
constantly on
blinking alternately
blinking
Device off
Self-test when powering up
Device ready for use
Device insecure: configuration password not assigned
Time or connect-charge reached