Lancom DSL Series Manual page 27

ISDN status Status of ISDN S
off
green
green
red
red
ISDN data Separate status display for both ISDN B channels:
off
green
green
green
green
green
Status of the four LAN ports in the integrated switch:
LAN 1
LAN 2
LAN 3
off
LAN 4
green
green
red
Gives information about the wireless LAN access of the internal wireless net-
WLAN link
work adapter of the base station.
LANCOM Wireless DSL – LANCOM Wireless ADSL
connection:
0
Not connected or no S
blinking Initializing D-channel (establishing contact with the connec-
tion point)
constantly on D channel ready for use
blinking Error (CRC error, framing error, etc.)
constantly on Activation of D-channel failed
If the ISDN status LED goes out automatically, this does not indicate
an S bus error. Many ISDN connections and PBXs put the S
0
a power-save mode after a certain time. The S
reactivated as required, and the ISDN status LED will once again light
up green.
No connection established
blinking Dialling
flashing Establishing first connection
flashing Establishing further connection
constantly on Connection established via B channel
flickering Data traffic (send or receive)
No network device connected
constantly on Connection to network device operational, no data traffic
flickering Data traffic
flickering Collision of packets
Chapter 2: Installation
voltage (no error message)
0
bus is automatically
0
bus into
0
27