MTU M015710/04E Operating Instructions Manual page 78

177 – AL LifeData restore incomplete
Cause
this error message is generated
if a CRC is faulty during a data
upload to ADEC (indicated for
each individual module).
180 – AL CAN1 Node Lost
Cause
Connection to a node on CAN
bus 1 failed.
181 – AL CAN2 Node Lost
Cause
Connection to a node on CAN
bus 2 failed.
182 – AL CAN Wrong Parameters
Cause
Incorrect parameter values
entered in data record.
183 – AL CAN No PU-Data
Cause
The selected CAN mode
initializes communication by
means of the PU data module.
However, the necessary PU data
module is not present or is
invalid.
184 – AL CAN PU-Data Flash Error
Cause
A programming error occurred
when attempting to copy a
received PU data module into
the Flash module.
ZKP-Number: 2.4000.006
Corrective action
u Contact Service.
ZKP-Number: 2.0500.680
Corrective action
u Contact Service.
ZKP-Number: 2.0500.681
Corrective action
u Contact Service.
ZKP-Number: 2.0500.682
Corrective action
u Contact Service.
ZKP-Number: 2.0500.683
Corrective action
u Contact Service.
ZKP-Number: 2.0500.684
Corrective action
u Contact Service.
M015710/04E 2012-09 | Troubleshooting | 93