MTU M015710/04E Operating Instructions Manual page 136

18. Mount double-walled HP line (5) and use torque wrench to tighten to the specified torque. Tightening
sequence:
1 Adapter (4)
2 Rail (6)
Name
Union nut / thrust
screw
19. Fit cable connector onto injector.
Note: Failure to reset drift compensation (CDC)
will void the emissions certification.
20. Reset drift compensation (CDC) with Dia‐
Sys® (→ E531920/...). If DiaSys® is not
available, contact Service.
Final steps
1. Install cylinder head cover (→ Page 144).
2. Open fuel supply to engine.
Size Type
Tightening torque
Lubricant
M015710/04E 2012-09 | Task Description | 151
Value/Standard
40 Nm + 5 Nm