Table of Contents
Advertisement
Draining residual oil from
equipment carrier (only with
unscheduled engine oil change)
1.
Provide a suitable container in which to col‐
lect the engine oil.
2.
Remove drain plug (1) and drain engine oil
from engine oil heat exchanger and from
engine oil filter.
3.
Remove drain plugs (2) and (3) and drain
engine oil.
4.
Replace engine oil filter (→ Page 171).
5.
Install drain plug(s) with new sealing ring.
6.
Tighten drain (2) and (3) with torque wrench to specified tightening torque.
Name
Screw
Filling with new engine oil
1.
Open cover on filler neck.
2.
Pour engine oil through the filler neck up to
the "max." mark on the oil dipstick.
3.
Close cover on filler neck.
4.
Check engine oil level (→ Page 169).
168 | Task Description | M015710/04E 2012-09
Size
Type
M26 x 1.5 Tightening torque
Lubricant
Value/Standard
(Engine oil)
100 Nm +10 Nm
Hide quick links:
Advertisement
Table of Contents
