Fisher & Paykel RS36W80 series Installation Instructions Manual page 37

@1 ADJUST HINGE TENSIONING SCREWS
Hinge tensioning screws can be tightened if increased door closing force is required.
To ensure the door shuts on its own, when pushed within the self close activation range, the hinge tensioning screws need to be tightened. The hinge tensioning screw is located in the door
1
hinge. To tighten the screw, rotate the screw to the right (refer to A).
Repeat this process on bottom hinge tensioning screw.
A
Hinge tensioning screw
35