Product And Cavity Dimensions; Door Opening - Fisher & Paykel RS36W80 series Installation Instructions Manual

b b
115° DOOR OPENING
(FULL ROTATION)
115° DOOR OPENING 115° DOOR OPENING
[FULL ROTATION] [FULL ROTATION]
DOOR OPENING AND CLEARANCE DIMENSIONS
Depth of door (widest opening) measured from front of door
A
Depth of drawer (open) measured from front of cabinetry*
B
Minimum door clearance** to adjacent wall*
C
Minimum door clearance** to adjacent wall*
D
* Does not include the custom door panels or handles to be manufactured and fitted by cabinetmaker.
** Measured from front cabinetry edge.
5

PRODUCT AND CAVITY DIMENSIONS

c c
b b
A A
Wall
(115° – full internal access)
(90° – reduced internal access)
d d
a
90° DOOR OPENING
Wall
90° DOOR OPENING 90° DOOR OPENING
Z
For 90° door swing a hinge limiting pin is supplied with
your appliance. This pin fits in the boreholes of the top
hinge (refer to Z).
WARNING!
Before opening doors to the product, ensure the product
● ●
a
is on its base packer and the polystyrene stability blocks
are still in place. Failure to follow these instructions
could lead to serious injury or death.
Drawer must be closed when fitting hinge limiting pin.
● ●
Open door to 90°.
1
Using a hammer, drive the hinge limiting pin through the
2
boreholes which are now vertically aligned.
inches (mm)
37" (940)
14 3/16" (360)
16 1/8" (410)
4 3/8" (110)
9