Fisher & Paykel RS36W80 series Installation Instructions Manual page 36

Place the side trim against the alcove side wall with the shorter lip facing the bottom (refer to D).
4
Ensure the side trim is positioned as high as it will go.
● ●
Engage the side trim with the brackets by pushing the trim inwards at the locations of the top and middle side trim brackets. Once the trim has engaged with top and middle brackets, then push
● ●
and engage the side trim at the location of the bottom bracket (refer to E).
IMPORTANT!
Ensure there are no visual gaps between the product and side trims.
● ●
Each bracket has two engagement points for the trim to locate. Ensure the trim is engaged at both points (refer to F).
● ●
Repeat this process for the remaining side trim.
Correct visual gaps by loosening side trim screws and moving trim within clearance. If further adjustment is required, relocate brackets to desired position.
D
34
@0 ATTACH SIDE TRIM BRACKETS – (B) FIXED SCREW METHOD
E
Top view of side trim engaged
correctly in side trim bracket
Side trim
Suggest
engagem
"ensure
Side trim bracket
F