Fisher & Paykel RS36W80 series Installation Instructions Manual page 31

The standard appliance includes a stainless steel toe kick (4" (102mm)) and the hardware required to mount the toe kick (4" (102mm)). Alternatively the customer can supply their own toe kick
(4 – 6" (102 – 152mm)) for complete integration of the appliance.
If applicable, remove any remaining
1
protective film on your door panels.
Open the refrigerator door, firmly push top
2
cover over the top studs.
Repeat this process for the freezer drawer.
Open the refrigerator door, firmly push side
3
cover over the side studs.
Repeat this process for the freezer drawer.
!8 ATTACH COVERS AND TOE KICK
Installing toe kick
4
Unscrew the toe kick bracket screws mid-way, and bring forward (refer to A and B).
Repeat this process on the opposite side.
Place toe kick in front of the brackets and gently push towards the appliance until flush with
5
surrounding cabinetry. Once satisfied, remove the toe kick.
Tighten the toe kick bracket screws to lock brackets into position and remove the backing
6
from the Velcro strip (refer to C). Attach toe kick to the adhesive surface.
A
B
C
29