Printing On Both Sides Of The Paper; Automatic 2-Sided Printing Guidelines - Xerox Phaser 4510 User Manual

Printing on Both Sides of the Paper

This section includes:
■
■
■
Note:
www.xerox.com/office/4510support.

Automatic 2-Sided Printing Guidelines

Automatic 2-sided printing is available from all trays. Before printing a 2-sided document,
verify the following requirements:
■
■
The following paper and media cannot be used for 2-sided printing:
■
■
■
■
See also:
Downloaded From ManualsPrinter.com Manuals
Automatic 2-Sided Printing Guidelines
Binding Edge Options on page 3-24
Selecting 2-Sided Printing
For information about manual two-sided printing, go to the Online Support Assistant at
The printer must have a duplex unit installed. The duplex hardware comes standard on the
Phaser 4510DX and 4510DT configurations, and it is a option that is available for the
Phaser 4510B and 4510N.
The paper must be a supported size for the tray. For a list of supported paper sizes, see
Supported Paper and Media
Paper Tips page:
a.
Select Information , and then press the OK button.
b. Select
Information Pages
c. Select
Paper Tips Page
Transparencies
Envelopes
Labels
Any die-cut specialty media, such as business cards
Supported Paper and Media
Printer Configurations on page 1-4
on page 3-23
on page 3-24
on page 3-3. For a list of paper types and weights, print the
, and then press the OK button.
, and then press the OK button.
on page 3-3
Phaser® 4510 Laser Printer
3-23
Printing on Both Sides of the Paper