Xerox Phaser 4510 User Manual page 71

3.
4.
5.
Downloaded From ManualsPrinter.com Manuals
■ For Monarch and DL envelopes, place the envelopes in the tray flap-side down with
the top of the envelope entering first.
Insert the tray into the tray slot, and push the tray completely into the printer.
On the control panel, select the envelope type and size:
a. Select
Paper Tray Setup
b. Select ,
Tray 2 Paper Tray 3 Paper
c.
If the size is correct and
and then press the OK button. If the correct media type and size are not
current setup
displayed, change the setup:
■ Select Change setup
■ Select from the list displayed, and then press the OK button.
Envelope
■ Select the appropriate paper size, and then press the OK button.
In the printer driver, select either Envelope as the paper type or the tray you just loaded as
the paper source.
, and then press the OK button.
, or
Tray 4 Paper
Envelope is displayed as the current paper type, select
, and then press the OK button.
Phaser® 4510 Laser Printer
3-35
Printing on Specialty Media
4510-109
4510-152
, and then press the OK button.
Use