Xerox Phaser 4510 User Manual page 70

4.
5.
Printing Envelopes from Trays 2–4
1.
2.
Downloaded From ManualsPrinter.com Manuals
On the control panel, press the OK button if the size is correct and
as the current paper type, or change the paper type and size:
a. Select
Change setup
b.
Select Envelope , and then press the OK button.
c. Select the appropriate paper size, and then press the OK button.
In the printer driver, select either Envelope as the paper type or Tray 1 as the paper
source.
Pull the tray that you want to load with envelopes completely out of the printer.
Insert the envelopes into the tray, and adjust the paper guides to fit the envelopes.
■ For #10 Commercial, C5, and B5 envelopes, place the envelopes in the tray
flap-side down with the top of the envelopes toward the left of the printer.
■ Do not load more than 75 envelopes in Trays 2-4 at any time.
, and then press the OK button.
Phaser® 4510 Laser Printer
3-34
Printing on Specialty Media
is displayed
Envelope
4510-089
4510-108