Sanyo PLC-WXU30 Owner's Manual page 181

Edit capture image
Drawing figures
1
Click " :Pencil" button on the form tool bar.
2
Select its attribute (shape, width, color and translucence) from the form and attribute tool bar.
3
Drag a mouse pointer on the screen image to draw the figure.
Erase drawn objects
1
Click " :Eraser" button on the form tool bar.
2
Select its attribute (shape, width) from the form and attribute tool bar.
3
Drag a mouse pointer on the screen image to erase the figure.
Hints of the drawing
Straight line tool.............. To draw the vertical line or horizontal line, drag a mouse pointer with shift key
pressed.
Square tool ........................ To draw the quadrate, drag a mouse pointer with shift key pressed.
Oval tool ............................. To draw the perfect circle, drag a mouse pointer with shift key pressed.
To cancel the drawing, select command "Edit"-"Undo" from the menu.
To erase all the drawing at once, select command "Edit"-"Delete all" from the menu.
The popup menu appeared by right clicking of the mouse is also available to select the tool and
change the attribute.
Setting of the drawing tool attribute
When clicking " :Attribute" button on the standard tool bar, the following window will appear. This
window appears only if the pencil or eraser tool is selected.
Sets translucent
color
How to use the Network communication
Line width
Large: 8 dots
Medium: 4 dots
Small: 2 dots
Select a color on the
color pallet appeared
by clicking here.
99