Installing The Projector In Proper Directions - Sanyo PLC-WXU30 Owner's Manual

Safety Instructions

Installing the Projector in Proper Directions

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe
accident or fire hazard.
This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen as
shown in the figure below.
Bottom Front
Downward Upward
(Usual)
Be sure to set the Fan control in MAX in the setting menu when
the projector is inclined between +40 degrees to +140 degrees
to the horizontal plane (p.56).
Positioning Precautions
Avoid positioning the projector as described below when installing.
10
10 10
8
Bottom Front
Upward Downward
Do not tilt the projector more than 10 degrees from side to side.
Do not put the projector on either side to project an image.
In upward projection, do not tilt the projector over 10 degrees right and left.
In downward projection, do not tilt the projector over 10 degrees right and left.
50º 50º
40º
40º
Fan Control
"Max"
180º 0º
Fan Control
"Normal"