Sanyo PLC-WXU30 Owner's Manual page 266

Memory viewer function
Image viewer in the manual mode
1. Select "Manual mode" from "Menu" on the browser window of the memory viewer and press SELECT
button.
2. Select a file to display with point buttons and press SELECT button. The selected file image is
displayed on the screen.
3. During displaying the image, you can control the displayed image with control buttons as described
in the table below.
Point Operation
Manual playback with next file
Manual playback with previous file
Start auto-playback*
Stop auto-playback*
* The display time of the image and the number of repeat at the auto-playback mode are set up
from the "Set" menu on the browser window
* Point buttons operate as the scroll key during displaying the text file .
Note:
During operating the memory viewer, the Network Viewer and Network Capture function cannot be used.
The program file does not support in the manual mode. Use it in the program mode.
* To display the portrait documents such as text files, use the point
8
buttons to scroll up and down the page.