Sanyo PLC-WXU30 Owner's Manual page 35

Display area H
Use the Point buttons to adjust the horizontal area
displayed by this projector.
Display area V
Use the Point buttons to adjust the vertical area
displayed by this projector.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the SELECT button. Move the red arrow pointer to the Mode
that you want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press the
SELECT button.
Quit
Exit the PC Adjust Menu.
Notes:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i, or 1080i is selected in the PC
System Menu (p.32).
• PC Adjust Menu cannot be selected when Computer
1(Digital) is selected in the Input Menu (p.31).
Move the red frame pointer
to the desired item and
press the SELECT button.
To clear adjusted data
Vacant
Values of "Total dots",
"Horizontal", "Vertical",
"Display area H", and
"Display area V".
To store adjusted data
Close this dialog box.
Computer Input
This Mode has stored
parameters.
35