Sanyo PLC-WXU30 Owner's Manual page 174

Chapter 8 Network capture functions
[3] Control by the projector
* PC provides the Network Capture.
PC1
PC3
Select "Network" as input mode previously.
1
Select "Network Capture" icon from "Network" menu. Press SELECT button on the projector twice to
display the network capture setting pallet.
2
Select PC number to connect .
3
Select "Connect" and then press SELECT button to start capturing. The screen image of the selected
computer will appear on the projected screen in real time.
4
To end capturing, select "Disconnect" and then press SELECT button.
The IP address of the connecting PC should be registered previously (
If the error message appears, check item "Parameter set up" (
The projector does not provide the function to register the IP address of the computer and to set the
parameter of the capturing. They should be registered by using the web browser previously (
92
PJ1
PC2
Capture
PC4
PC5
Set "On" when
using the wireless
mouse function
* Start capturing of
the PC1 from the
projector PJ2.
PJ2
Project a screen
PC6
image of PC1 with
PJ2.
p.89).
p.88).
p.89-90).