Table of Contents
Advertisement
This machine will perform many types of operations
that are beyond the scope of this manual. Many of these
operations can be dangerous or deadly if performed
incorrectly.
The instructions in this section are written with the
understanding that the operator has the necessary
knowledge and skills to operate this machine.
If you are an inexperienced operator, we strongly
recommend that you read books or trade articles, or seek
training from an experienced bandsaw operator before
performing any unfamiliar operations.
Switch
Disabling
Key
On Button
Off Button
Refer to
and the descriptions below to
become familiar with the basic controls and components
of your bandsaw.
. W1825 switch disabling key and
ON/OFF switch
: Disables the ON and OFF button when
the key is turned to the "0" position. Enables ON and OFF
button when the key is turned to "1" position.
Starts motor only if the OFF button is popped
out and power switch key is turn to "1" position.
Disables the ON button. Enable the ON
button by twisting the OFF button until it pops out.
-32-
Advertisement
Table of Contents
