Elements In The Nice Home Security Alarm System - Nice HSCU1 Instructions And Warnings For Installation And Use

3.3 - Elements in the Nice Home Security alarm system

Control unit
The control unit is the core of the system; it receives information from the detectors, keypads and transmitters and,
according to its status, generates an audible alarm (siren) or sends signals on the fixed or mobile telephone net-
work. It has an incorporated siren for prompt signalling in the event of intrusion. The integrated keypad is used to
configure the system and may also be used as an internal control device. The control unit is equipped with tele-
phone diallers to enable connection between the protected location and the outside world, also at great distances.
In the event of an alarm, it automatically sends a voice warning message to the pre-set telephone numbers: own-
er, police forces, etc. The GSM version also enables the unit to send text messages.
The operating mode can also be reversed, i.e. commands can be sent to the control unit via the telephone.
The models available are:
HSCU1GC Control unit for combined alarm systems, wired and via radio, mains powered at 230 Vac. Equipped with PSTN and GSM telephone diallers
HSCU1C Control unit for combined alarm systems, wired and via radio, mains powered at 230 Vac. Equipped with PSTN telephone dialler
HSCU1G Control unit for alarm systems via radio, battery powered Equipped with PSTN and GSM telephone diallers
HSCU1 Control unit for alarm systems via radio, battery powered Equipped with PSTN telephone dialler
Detectors
The detectors serve to control objects and the environment in which they are installed, and to transmit events to the control unit. For efficient control, they
must be positioned at strategic points of the room, doors, windows, shutters, porches etc. The types of detectors are classified as follows:
- perimeter, for opening of doors, windows, shutters
- perimeter, via the "vertical curtain" detector
- volumetric, for the detection of presence inside the area covered by the sensor
- dual technology, a combination of infrared and microwave
- outdoor, designed for the protection of external areas, porches, verandas, gardens etc.
- special, for the detection of flooding, fine combustion powders (smoke), glass breakage etc.
Up to 99 detectors via radio can be used or double this number if programmed in pairs, with the "AND" function. Control units with wired connections are fit-
ted with 6 inputs on detectors with wired connections, for association with the zones A - B - C as required.
The models available are:
HSDID11 Magnetic contact detector with input for NO contacts and one for NC contacts (also with pulse count); single or differentiated alarm.
Intruder sensor
HSDIM11 Infrared detector with volumetric lens with input for second contact (NC or pulse count); single or differentiated alarm. Intruder sensor
HSDIM12 Infrared detector with curtain lens and input for second contact (NC or pulse count); single or differentiated alarm. Intruder sensor
HSDIM21 Infrared detector with volumetric lens for indoor application, in protected areas up to 12 m with 120° opening.
With sensitivity adjustment, immediate alarm or alarm on second pulse, protection against opening and removal
HSDIM22 Volumetric detector with dual technology, infrared and microwave radar, for indoor application, in protected areas up to 12 m with 90°
opening. With sensitivity adjustment, immediate alarm or alarm on second pulse, protection against opening and removal.
HSDOM21 Volumetric detector with dual technology, infrared and microwave radar, for outdoor application, in protected areas up to 12 m with 90°
opening. With sensitivity adjustment, immediate alarm or alarm on second pulse, protection against opening and removal
HSDID01 Volumetric detector of glass breakage
HSDIS01 Fine volatile combustion powder detector
HSDIW01 Flooding detector
HSDID11 HSDIM11 HSDIM12
Transmitters
These represent the most practical and simple means of activating and deactivating the alarm system both inside
and outside the rooms; they enable both partial and total activation of the system and the transmission of emergency
signals.
The models available are:
HSTX4 4-channel bidirectional radio transmitter for alarm systems
HSTX8 8-channel bidirectional radio transmitter (4 channels for alarm systems and 4 for automation control)
HSDIM21 HSDIM22 HSDOM21 HSDID01
HSCU1GC
HSCU1C
HSCU1G
HSCU1
HSDIS01 HSDIW01
HSTX4
HSTX8
7