Table of Contents
Advertisement
Power supply
Insulation
Backup battery
Backup battery autonomy
External battery
Absorption (12Vdc)
Power supply output
Wired alarm inputs
Wired anti-tamper device
Control inputs
Wired alarm outputs
Wired outputs
Weight
Power supply
Insulation
Absorption
Autonomy
Weight
GSM telephone connection
Additional functions
Alarm via radio inputs
Anti-tamper via radio
Alarm via radio outputs
Radio system anomalies
Event log
Timers
Displays
Commands
Internal siren and indicator
Acoustic signals
Vocal guide
Radio
reception/transmission
Radio range
Fixed PSTN telephone
connection
Dimensions
Operating temperature
TECHNICAL SPECIFICATIONS
Technical specifications for models HSCU1GC and HSCU1C
230 V ~ 50 Hz; maximum power 35 W
Class II (no earthing connection required)
12V – 2.2Ah lead rechargeable (not supplied)
With battery charged, approx. 36 hours; autonomy estimated with operation on stand by and without absorption on
wired connections.
An external battery can be connected (maximum 12 V - 6 Ah) on terminals +ALI and GND
55mA on stand-by (without absorption on wired connections); 125mA with display lit; 500mA in alarm status.
12 Vdc ±30%; 1.2 A maximum total.
6 lines for NC contacts, programmable on the 3 zones A-B-C
3 lines for NC tamper contacts, programmable on the 3 zones A-B-C
1 line for connection of supplementary arming device
1 output for 12 V siren control, maximum 0.5 A; 1 output for self-powered siren 14 V
2 relay outputs (NC/C/NO contacts maximum 50 V-0.5 A) for programmable functions
2,250 Kg
Technical specifications for models HSCU1GC and HSCU1
Battery Pack HSPS1 (9 V ~12 Ah)
Class III (safety extra low voltage)
Approx. 200 µA on stand-by; maximum 200 mA in alarm status with PSTN operative; maximum 400 mA in alarm status
with GSM operative
At least 2 years; autonomy estimated with 2 on/off cycles per day, 10 detectors present and 10 alarms per year. Autono-
my is reduced in the event of numerous telephone calls
1,500 Kg
Technical and additional specifications for models HSCU1G and HSCU1GC
GSM module, Quad-band, EGSM 850/900/1800/1900 MHz
Output power: - Class 4 (2W) at 850 / 900 MHz - Class 1 (1W) at 1800 / 1900 MHz Sensitivity: - 107 dBm at 850 / 900
MHz - 106 dBm at 1800 / 1900 MHz
Delivery of technical or alarm SMS messages.
Caller ID recognition (for direct access).
Hands-free communication
Technical specifications common to all models (HSCU1G, HSCU1, HSUC1GC, HSCU1C)
Up to 99 programmable detectors: immediate, delayed or AND, on 3 activation zones A-B-C or in 24-hour zones Panic,
Robbery, Technical Alarm.
Reception of tamper signal from each detector; reception of supervision and low battery signals.
Digital transmission encoded at 72 bit, for alarm device control.
Continuous, simultaneous and programmable control of 2 working frequencies.
Last 200 events
Programmable delayed activation; programmable input delay on each detector; general alarm time 3 minutes (fixed).
Display 2 x 16 characters, with option of naming each peripheral (label).
Built-in alphanumerical keypad, 20 keys.
Alarm siren 106 db + buzzer with low intensity signal function.
Vocal messages recordable on 32 Mbit flash memory for approx. 500 s of messages. Digitalised PCM user guide at 64
Kbps. Main communication guidelines for the user.
Vocal synthesis with 125 pre-recorded "phrases", available in the main languages.
Digital bidirectional communication, in dual band frequency (433 and 868 Mhz) with quartz control; devices pre-encoded
in the factory and managed in self-learning mode.
100m in open field free of disturbance or approx. 20 m inside buildings.
Connection with standard RJ14 socket. Automatic adaptation to line characteristics in country of use, according to the
selected language. Compatible with broadband lines.
307 x 200 x 53 mm
from -10°C to +40°C
35
35
Advertisement
Table of Contents
