Table of Contents
Advertisement
4
INSTALLATION: the control panel and accessories
4.1 - Set-up of system components for configuration
All system devices communicate via radio therefore the system should be con-
figured on a table before final installation of all devices.
The following operations should be carried out for control units that require
electrical connections:
1) configuration of radio devices on a table;
2) final installation of each device;
3) electrical connections.
To avoid errors, operation and reception problems proceed as follows:
The perfect radio coverage of the devices can be checked using this pro-
cedure before installation.
a) Open the packaging and lay out all the products on a table;
b) Insert the "voice guide" memory board supplied in the control panel; on the
GSM version also insert the "SIM" card (see installation paragraph);
c) Power up the control unit and program it in "device acquisition" mode;
d) Put the batteries in the devices which will then be acquired one by one by
the control unit;
d) Test operation of the devices;
e) Place the control unit in the envisaged point (without fixing);
f) Place all the other devices in the envisaged points (without fixing);
g) Check that each device has sufficient coverage for radio communication
(see paragraph "Testing the control unit").
On the GSM versions check that the signal strength and coverage are suf-
ficient;
h) Install all devices;
i) If necessary, configure the control unit with the advanced and detailed func-
tions.
The next paragraphs describe the control panel installation phases (for all mod-
els) and electrical connections of versions that envisage wiring.
4.2 - Preliminary installation checks and product applica-
tion limits
Before proceeding with installation, check the condition of the product, suit-
ability of the selected model and suitability of the intended installation environ-
ment.
• Check that all use conditions are within the "product application limits" and as
stated in the "Product technical specifications".
• Check that the intended installation area is suitable for the overall size of the
product.
• Check that the fixing surfaces are sufficiently solid and that the areas are pro-
tected against the risk of impact.
• The product can only be used with products part of the Nice Home Security
system.
4.3 - Control unit description
All control unit models have a system memory board with voice guide ("l"
fig. 6A - 6B). The voice of this guide is in the language of this manual; versions
in a different language are available on request.
This memory board is supplied with this manual and must be inserted in the con-
trol unit before starting installation and with the power off (see paragraph 4.4.2).
This board records all system parameters (excluding voice messages recorded
by the installer or user) of every programming operation and can be transferred
from one control unit to another.
Some control unit models (models HSCU1GC and HSCU1G) are equipped with
a GSM telephone dialler.
The SIM card must be inserted before starting installation and with the power
off (see paragraph 4.4.2). The SIM card can be of any operator and subject to
any type of contract (only the "voice" and text messaging services are used) but
it must be configured with the PIN code = "1234" or have the function "access
without PIN" active: this operation can be carried out by inserting the SIM card
into any GSM telephone.
Control unit description:
Fig. 6A mod. HSCU1G and HSCU1 - Fig. 6B mod. HSCU1GC and HSCU1C
a - Display
b - Keypad
c - Microphone
d - Socket for PSTN telephone line
e - Hole for cable routing
f - PC connection socket
g - Terminal board for electrical connections (models HSCU1G and HSCU1GC)
h - Internal siren
i - Loudspeaker
l - System memory board with voice guide
m - GSM SIM (models HSCU1G and HSCU1GC)
10
n - Battery pack (models HSCU1G and HSCU1)
o - Buffer battery (models HSCU1GC and HSCU1C)
p - Electric mains power terminal (models HSCU1GC and HSCU1C)
q - Power supply unit (models HSCU1GC and HSCU1C)
Models HSCU1G and HSCU1
6A
a
b
c
d
Models HSCU1GC and HSCU1C
6B
a
b
c
d
e
f
q
g
f
n
m
l
i
h
p
o
m
l
i
h
Advertisement
Table of Contents
