Manually Setting The Clock - Sangean RCR-11 WF Instruction Manual

Manually setting the clock

The RCR-WF radio will normally set its clock automatically to local time after a connection to
the Internet has been established. Should you need to set the time manually, change the time
zone, or manually switch from winter to summer time (GMT to BST - also known as daylight
savings time), then please follow this procedure.
. Press the Standby button to switch on your radio.
. To set all time settings press and hold the Menu button to access the menu for the current mode.
. Press the Tuning buttons until 'System settings' is highlighted on the display. Press the Select
button to enter the system settings menu.
. To change the time zone setting go to step . To change from winter to summer time go to
step 13. To change the current time or date setting Press the Tuning buttons until 'Time/Date'
is highlighted on the display, then press the Select button to enter the time and date setting
screen.
5. Press the Tuning buttons until 'Set Time/Date' is highlighted on the display. Press the Select
button to enter the clock setup. The day digits will flash.
6. Press the Tuning buttons until the correct day is shown on the display. Press the Select button
to enter the selection. The month digits will then flash.
7. Press the Tuning buttons to select the correct month. Press the Select button. The year digits
will then flash.
65