Setting The Clock Format - Sangean RCR-11 WF Instruction Manual

Setting the clock format

The clock display used in standby mode and on the playing mode screens can be set to  or 
hour format. The selected format is then also used when setting the alarms.
. With your radio switched on, press and hold the Menu button to access the menu for the current
mode.
. Press the Tuning buttons until 'System settings' is highlighted on the display. Press the Select
button to enter the system settings menu.
3. Press the Tuning buttons until 'Time/Date' is highlighted on the display. Press the Select button
to enter the time setup.
. Press the Tuning buttons until 'Set format' is highlighted on the display. Press the Select button
to enter the clock format menu. The current clock display format is marked with an asterisk.
5. Press the Tuning buttons to select either 12 or 24 hour format. Press the Select button to
confirm your choice of clock format. The display will then revert to the previous menu.
If the 12 hour clock format is chosen, the radio will then use the 12 hour clock for the setting of
alarms, and will display a 12 hour clock with an AM or PM indicator when in standby mode.
GB
64