Sangean RCR-11 WF Instruction Manual page 13

Table of Contents

8. Once you have connected your radio to the network (and therefore also to the Internet) it will

display the main menu. Press the Standby button to put the radio in Standby mode. It should

then display the time as obtained from the Internet. If the time display is not correct for any

reason, it can easily be adjusted later, see 'Manually setting the clock'. If you have followed

the steps on the preceding pages successfully, your radio will have connected to your router,

and then made a connection to the Internet and set its clock. If this is the case, then you can

try listening to radio stations via the Internet.

Table of Contents